You are here: Home > Wafer Check Valve (Pressure: 150LB-2500LB)

Ball ValvesGate Valves

Wafer Check Valve (Pressure: 150LB-2500LB)

Wafer Check Valve

Check Valve
Pressure: 150LB-2500LB
Size: DN15-DN2000
Design Std: API, DIN, BS, GB, JIS
Product Material: LCB, ASTM A351 CF8, CF8M, CF3, CF3M, A105, WCB
Wafer Check Valve
Product use
Butterfly check valve for clean lines and industrial, environmental protection, water treatment, high-rise buildings to the drainage to prevent reverse flow of media use.

Product introduction
The wafer flange clamped butterfly check valve is a energy-save product. It is manufactured based the foreign advanced technology and in accordance with relative international standards. This product is featured by excellent retaining per-formance, high safety and reliability and low flow resistance. It is suitable for systems in the industries of petrochemical food processing, medicine, textile, paper-making. Water, supply, drainage, metallurgy, energy, and light industry, etc, used as a check valve in one way.

Standerds compliance
Design and Manufacture: ANSI B16.34, API 6D
Face to face: API 6D
Flanged connection: 2-24 to ANSI B16.5 to API 605 on request
Test and inspection: API 6D
Shell test 150Lb 450 PSI, 300Lb, 600LB, 900LB
Seat test 150Lb 315 PSI, 300Lb 815 PSI, 600LB, 900LB(Hydrostatic)80PSI(Air)

Featutes
1. Small in size, light in weight, compact in structure, easy in maintenance.
2. Two torsion springs are used excerting on each of the pair valve plates. Which close the plates quickly and automatically.
3. The quick-close action prevents the medium from flowing back and eliminates water-hammer effect.
4. This valve is short in length, so that it is rigid and easy to mount.
5. It is easy to install on pipeline which is laid horizontally or vertically.
6. This valve is tightly sealed without leakage under the pressure water test.
7. Safe and reliable in operation, high interference-resistance.
8. The connection dimensions of flanges accord with the standards of GB4216-84 GB4216.84
9. The face to face dimensions are in accordance with GB12221-89. ISO5752-82. The stem of the valve should be perpendicular to the horizontal level when the valve is mounted on horizontal pipeling. For vertical installation the direction of flow should be downward.

Related Category: Check Valves

Related Keywords: Wafer Check Valves  Flanged Check Valves  Butterfly Check Valves  Flanged Stainless Steel Ball Check Valves