You are here: Home > Buy Check valve horizontal seating disc 200 LBS

Ball ValvesGate Valves

Buy Check valve horizontal seating disc 200 LBS

date:  Tue, Apr 5, 2011 at 5:41 PM

Dear Sir,
This is Eng. Rasha from Engineering Management Co.
I am contacting you asking offer for Valves inquiry as attached file.
And I would be grateful if I get an offer from you about it, if  it’s or part from placed within your scope of supply .
  Looking forward to hearing from you ASAP ,
Best Regards
Eng. Rasha Fraihat
 Engineering Management for trading and storage
 Amman, Jordan
Po. Box: 4767 Amman 11953 Jordan
Tel: 00962 6 5607654
Fax: 00962 6 5607653
Mobile: 00962 7 99165692

item  Qty.   Unit  Description 
          Globe valve 300 LBS screwed to ASA standard Bronze body renewable nickel alloy seat & disc union bonnet rising stem
(crane no. D52 or equal)
1. 20 Nos. Size ¾”
      Check valve horizontal seating disc 200 LBS screwed to ASA , standard bronze body & trim integral seat union cap.
(Crane No. D115 or equal).
2. 2 Nos. Size ½”
3 8 Nos. Size ¾”
      Ball valve mater forging carbon steel with wrench conforming to ASTM A 105 both ends socket weld rating 800 LBS
4. 8 Nos. Ball valve ASTM A-105 reduced bore 1.1/2”
       Wedge gate valve flange 150 LBS RF. Body material cast carbon steel conforming to ASTM ( A-216 GR WCB), out side screw and yoke bolted bonnet, rising stem trim
(11.1/2-13%CHR) flange drilled to ANSI (B16.5) for
 Crane No. 47x or equal.
5.  22 Nos. Size 1”
6. 200 Nos.  Size 6”
7. 3 Nos.  Size 24”
       Valve flanged wedge gate 300 LBS R.F cast carbon steel body to ASTM A-216 GR WCB outside screw and yoke bolted bonnet, rising stem trim 11.1/2-13% CHR flange drilled to ANSI( B-16-5)
 (crane no. 33x or equal)
8. 36 Nos. Size 6”
       Valve horizontal check socket weld # 600LBS forged steel body to ASTM (A-105GRll) union cap or bolted cap trim
(11.1/2-13%CHR) screwed conforming to ANSI (B 16.11)
9. 4 Nos.  Size 1”
      Valve flanged swing check 300 LBS. R.F cast carbon steel body to ATSM A-216 grade WCB bolted cap trim 11.1/2-13% CHR flanged drilled to A.S.A.B-16-5
(crane No. 159x or equal)
10. 25   Size 2”
      Valves & Fitting
11. 5 Nos. Butterfly valve rubber lined equipped with gear operator class #150 according to the below details:
BODY: is made of cast iron according to or ASTM(A 216 GR B)
BODY LINER: in non replaceable high nitrile rubber moulded into the body end to provide sealing joints with mating pipe flanges
DISK: stainless steel type 316
SHAFT: stainless steel type 316
SHAFT BEARING: special self lubricating type.
GEAR BOX: is weather proof unit supplied with hand wheel.



Related Category: Valve Buyers

Related Keywords: Check Valve Buyers  Check Valve Importers  Valve Buy Offers  Valve Buyers  Valve Importers  Check Valve Buyers Jordan  Check Valve Importers Jordan